Table saws are a really popular tool that are widely used for both professional and personal purposes.

So if you are someone who uses a table saw for either of the above mentioned reasons, you may have felt the need to improve the performance of your table saw.

And this is where a lubricant comes in.

Lubricant is used to reduce friction and allows the smooth functioning of the parts of a table saw.

It is applied to gears and blades, ensuring smoother cutting for the blades and preventing wear and tear of the gears.

In this article we have listed down the top three lubricants you can use for your table saw gear.

Best Lubricant for Table Saw Gears

 

 

1. B’laster 16-TDL Advanced Dry Lube with Teflon

 

 

Features:

• Type: Dry Lubricant Aerosol Spray Can
• Substance: Teflon Fluoropolymer
• Liquid Volume: 9.3 fl oz.

 

Blaster is a well-known company that’s been making high-quality lubricants for a long time.

Their B’laster Dry Lube, which comes in a handy spray can, is one of the best.

It’s made with Teflon, which reduces friction and wear, and it’s not just for table saws—it works great on locks, hinges, cables, and even plastics.

The spray design makes it easy to use, ensuring everything gets coated evenly.

The best part is how well it lubricates things, but be careful not to use too much, or it might look a bit white and cloudy.

Overall, if you need a reliable lubricant for your table saw gear that can also be used for other things, the B’laster Dry Lube is a solid choice.

 

 

 

2. WD-40 Specialist Protective White Lithium Grease Spray with SMART STRAW SPRAYS

 

 

Features:

• Type: Grease Spray Can with Smart Straw
• Substance: White Lithium
• Liquid Volume: 10 fl oz.

 

The WD-40 Specialist Protective White Lithium Grease Spray is the best choice if you are looking for a White Lithium lubricant.

The WD-40 Specialist product range has been fine-tuned to ensure that you receive the results you’re looking for quickly.

It’s perfect for metal-to-metal applications, which demand a lot of lubrication and corrosion resistance.

This lubricant sprays on evenly as a liquid and dries quickly to provide a thick, water-resistant layer. The protective coating doesn’t run off easily and provides utmost protection.

As it is a grease lubricant, it does a good job at avoiding dirt and dust and also prevents rust.

It has a wide range for a safe working temperature from 0 to 300 degrees Fahrenheit. It provides extreme protection within this working temperature range.

This lubricant is excellent for lubricating equipment before storing them and is also Volatile Organic Compounds (VOC)-free in 50 states.

The WD-40 Specialist Protective White Lithium Grease Spray is best suited for use on gears, sprockets, outdoor and automotive hinges, latches, pulleys, and door tracks.

As it is best suited for gears, this arguably makes it the best White Lithium Lubricant for table saw gears.

 

 

 

3. DuPont Multi-Use Lubricant Aerosol

 

 

Features:

• Type: Wet Lubricant Aerosol Spray Can
• Substance: Teflon Fluoropolymer
• Liquid Volume: 11 fl oz.

 

The DuPont Multi-Use Lubricant is the last one on our list but surely one of the best options for a Teflon lubricant.

Just like the B’laster lubricant, this one also has Teflon Fluoropolymer as its main substance.

Teflon allows for extreme wear protection and lubrication, making this lubricant a high-performance option.

It offers great resistance to corrosion as it contains corrosion-resistant additives.

As it is a wet-style lubricant, it offers long-lasting lubrication. Its silicone-free composition, coupled with its water resistance properties, makes it highly resistant as it protects from heavy moisture and rust.

It can work in extreme temperatures, again due to its strong resistance. The temperature range is from -30°F to +300°F.

 

 

How to Choose the Best Lubricant for Table Saw Gear?

Most common lubricants are used for various purposes.

However, when looking to buy a table saw gear lubricant, you need to keep the specific requirements in mind.

There are many different lubricants and substances that can be used as lubricants.

That being said, below, we have designed a buyer’s guide to make the choice easier for you.

 

1. Design / Shape

Before diving into the specifics of a lubricant, the first step is to know what type of design you want.

Choosing the right design makes things a lot easier. Lubricants come in two designs: spray cans and tubes.

 

Spray Cans – An aerosol spray can, as the name suggests, sprays the lubricant where it is needed.

It is easier to use, as the application of the lubricant is much smoother this way.

So if you’re looking to apply the lubricant on the gear of your table saw, you won’t have to apply it with your hands and spread it all over; just spray it, and you’re good to go.

 

Tube – However, some lubricants on the market come in a tube.

The application for tube lubricants is not easy, and hence we don’t recommend them for table saw gears.

All the lubricants on our list come in a spray can.

 

2. Type

When choosing the best lubricant for your table saw gear, you need to keep the type in mind.

Choosing the right type of lubricant is really important to ensure it provides you maximum benefit.

Each type has its own pros and cons and is best suited for different uses.

For table saw gear the most common types of lubricants are oil, grease and dry;

 

Oil – Oil is undoubtedly the most common lubricant.

This type of lubricant is best suited for use on hinges, tools, and sharpening blades.

It doesn’t offer much resistance, just some level of lubrication.

So if you’re looking to use it on saw gear that easily gets dirty by collecting dust, then oil isn’t really a safe option.

Oil collects more dust, making the surface dirtier.

Moreover, oil isn’t water-resistant as water causes the oil to wash away, hence rendering the lubricant useless.

Keeping these points in mind, it’s best to avoid oil lubricants when looking for a lubricant for your table saw gear.

 

Grease – Grease has similar properties to oil, but it offers better lubrication.

Grease comprises mainly of oil, which is mixed with a thickener or other lubricants as well.

The consistency of the grease depends on the amount of thickener present in the composition.

Unlike oil, grease sticks better on surfaces as it is thicker than oil.

Grease stays on for longer periods of time; however, it can attract dust and dirt to the surface, which makes it a poorly suited option for table saw gears and linkages.

 

Dry – A Dry Lubricant is the best option when you’re looking to avoid dirt and dust at all costs.

This is a great alternative to oil and grease and comes in a spray can.

It is usually mixed with water and solvents like alcohol.

When sprayed, it evaporates, leaving behind only a thin layer of lubricant that offers protection and reduces friction.

A dry lubricant prevents gunk from collecting and keeps the surface clean.

So if you’re someone who wants to keep the saw gear free from all sorts of dirt and dust, a dry lubricant is your safest bet.

 

3. Substance

The substance of a lubricant is the main component in the lubricant.

For table saw gears, the best ones are Teflon, White Lithium, and Grease.

It is important to consider the main component when choosing the best lubricant for your table saw gear.

 

Teflon – is the most popular choice when it comes to table saw gear lubricants. It is a film lubricant, meaning it is dry and doesn’t require grease and oil.

However, it still does a perfect job at minimizing the friction between two surfaces.

This lubricant is mostly intended for use as a dry lubricant and helps with corrosion resistance.

Many table saws are prone to corrosion and rust, so this is the best solution.

Another plus point is the fact that Teflon is a highly inert substance.

This makes it an attractive choice as it is not reactive to other chemicals, making it a great solution for use on materials that will come in contact with chemicals.

However, table saw gears don’t have any contact with chemicals, so this is something you don’t really need to worry about.

 

White Lithium Grease – is another one of the popular options as it is highly tolerant to extreme pressures.

The working temperature range of White Lithium is very flexible and covers extreme temperatures as well.

It can extend from –25°C right up to 130°C.

Coupled with its high water resistance, this substance is a great option if you’re looking for long-term lubrication.

 

Graphite – Unlike using oil as a basic lubricant, graphite is a much better option as it does not leave any sticky residue. The problem with sticky residue is that it attracts dust.

For table saw gears, you need to avoid any sort of dust, hence it is best to use graphite instead of oils.

Hence, making graphite another solid choice for lubricants.

 

Does a Lubricant Help Prevent Rust?

The primary purpose of a lubricant is not rust prevention; they are not built for that.

However, some lubricants do an excellent job at it, especially the WD-40 Specialist Protective White Lithium Grease Spray, which helps with lubrication as well as rust prevention.

 

Conclusion

With so many materials to use as a lubricant, it’s good to know how they work.

We picked the top three lubricants for your table saw gear.

These lubes not only make things smoother but also make your tools work better.

The B’laster Dry Lube is our top pick, but the other two are also good choices.

Now, it’s up to you to decide which one is right for you.